Software Solution

Meshlium visualization plugin allows to:
- Visualize real-time data.
- Show measured data graphically between different time periods. It is possible to select for example last week, or last month data.
- Compare different parameters in the same node, and check their historical evolution in a comparative way.
- Geolocate the nodes via GPS and a communication module, and check in a visual map the data measured for each node.
- Sensor data is stored internally using the Meshlium MySQL database. Data can be extracted to a third Cloud Platform later.
Know more about the Meshlium Visualizer at the Meshlium Technical Guide. Section 16.
* There is no SSH access in the IoT Vertical Kits.
Meshlium Sensor Visualizer interface includes 100 times free access limit.
After 100 log-ins a license fee can be acquired to keep on using it.
Application examples
Controlling quality of irrigation water with IoT to improve crops production.
The irrigation water quality, as well as the correct management of the water resources, is essential for the productivity and efficiency of the crops. Controlling and analyzing water before irrigating is crucial and its quality may vary significantly depending on the time of year. So frequent measurements are recommended. The Spanish company GMV has developed a water quality monitoring system based in Libelium technology. The nodes were installed at the "El Portal" irrigation dam, located on the Guadalete river where it passes through Jerez de la Frontera (Spain).
Early warning system to prevent floods and allow disaster management in Colombian rivers.
On May 18th 2015, the Colombian village of Salgar was devastated by a landslide. The La Liboriana river flood caused 83 deaths and left devastation and destruction on the communities all over the area. After this event, the National Unit for Disaster Risk Management – Unidad Nacional para la Gestión de Riesgos de Desastres (UNGRD) in Spanish – designed a plan to monitor and compile information on the La Liboriana, La Clara and Barroso rivers to prevent tragedies like the Salgar landslide. Federmán Comunicaciones, a Colombian company with more than ten years of experience in telecommunications, was responsible for the installation of an early warning system in disaster management in the region based on Libelium technology.
Monitoring aquatic and environmental parameters at the coldest weather conditions to encourage salmon spawning and reduce pollution in Oslo.
Being Norway one of the world's largest exporters of fish, activities such as trout and salmon spawn become crucial. As one of the first ThingFarm has developed an IoT solution for monitoring the water quality and conditions for living organisms, fishes and plants in rivers and sea. Within the last months of the year, salmons and trouts spawn in rivers all over Norway. To know if all parameters are adapted and stable for the fishes to spawn eggs, knowing the river and water conditions is of great value.
The city of Tilburg (NL) becomes smart and sustainable teaming with Libelium and Ericsson to develop an IoT environmental control platform.
Libelium and Ericsson have joined efforts to check the environmental status of the water standards, the air quality and the noise levels measured in several zones of Tilburg city (NL) to be visualized on a public website.
Preserving endangered freshwater mussels in the Ohio River with a Smart Water Project.
Aridea Solutions, an engineering company located in West Virginia, has trusted Libelium technology to assist in the development of the WIZARD (Water Intrinsic Zoological Ambient Research Device) Platform. The American company worked in October 2016 on a project for the US Army Corps of Engineers at Robert C. Byrd Locks and Dam to control mussels' ambient and environmental conditions. The aim was to protect them when working in local rivers and streams.
Hardware Components
Item | Qty |
---|---|
Meshlium 4G AP 868 | 1 |
Plug & Sense! SW-XTR 868 | 1 |
pH, ORP and temperature PHEHT probe | 1 |
Conductivity and salinity C4E probe | 1 |
Storage solution solution for PHEHT probe | 1 |
Suspended solid, turbidity, sludge blanket&temp MES5 probe | 1 |
Optical dissolved oxygen and temperature OPTOD probe | 1 |
External solar panel 7V - 500mA (power accessory for P&S!) | 1 |
outdoors USB cable | 1 |
Item | Qty |
---|---|
USB-220 V Adapter | 1 |
International adapter | 2 |
Conductivity Calibration Kit, K=0,1 | 1 |
Conductivity Calibration Kit, K=1 | 1 |
Conductivity Calibration Kit, K=10 | 1 |
ORP Calibration Solution | 1 |
pH Calibration Kit | 1 |
DO Calibration Solution | 1 |
Turbidity calibration solution 4000 NTU 125 ml | 1 |
Hardware Documentation

Read the Quick Start Guide to get information about kit components,
how to install and configure them and how to connect the
kit with the software services provider platform.
Meshlium Documentation
- Fully certified for the main markets: CE (Europe) / FCC (US) / IC (Canada) / ANATEL (Brazil) / RCM (Australia) / PTCRB (US) / AT&T (US)
Hardware Support
Technical Service (2 hours included)
- Arranged in 1 hour time-slot.
- Online: text, screen share, mic and webcam. Interactive.
- Useful for:
- Solve urgent questions that cannot wait forum timelines debug your code.
- Guide you step by step.
- Help you to design a system architecture.
- Improve your program to reduce power consumption, make it more efficient, etc
Programming Service
The Plug & Sense! nodes come ready to be used. Our engineers create complete codes for that specific devices. Codes are uploaded and tested one by one, so the user just needs to switch the nodes on.