Libelium-Devicelynk Smart Water Solution Kit

Libelium-Devicelynk Smart Water...
Libelium-Devicelynk Smart Water...
Libelium-Devicelynk Smart Water...

Devicelynk Smart Water is equipped with multiple sensors to improve and simplify remote water quality monitoring (pH, Dissolved Oxygen, Conductivity, etc). Using this kit swimming pool conditions can be remotely controlled, and cities can benefit by monitoring the quality of tap water.

This kit is suitable also for potable water monitoring, chemical leakage detection in rivers and the sea, remote measurement of swimming pools and spas, corrosion and limescale deposit, fish tank monitoring and seawater pollution levels.

The data is sent to the Internet by the GW using Ethernet and 4G radios.

Devicelink SWS-EU
€5,250.00

Need a quote or a different configuration? Click here.

Need a quote or a different configuration?

Software Solution

Devicelynk Logo

DeviceLynk and Libelium have partnered to create an Industrial Internet of Things (IoT) solution for water quality monitoring, capable of transforming Libelium SMART Water sensor data into Actionable Intelligence! Creating an IoT-based sensor network with DeviceLynk and Libelium is a simple, 3-step process involving sensors being deployed to the field, data automatically being collected and transmitted to the cloud by the embedded DeviceLynk Agent on Meshlium IoT Gateway, and decision makers accessing DeviceLynk’s cloud-based Actionable Intelligence Dashboards.

New sensor locations are quickly and easily added to the system with no coding or engineering required. Simply install the Waspmote sensors to your desired location, type a serial number into DeviceLynk.com, and immediately begin collecting, storing and visualizing water quality information. Start with DeviceLynk’s Water Quality application dashboards, or build your own from a library of over 100 gadgets.

DeviceLynk automatically monitors your data-streams for unsafe conditions, and sends notifications by e-mail or SMS when action needs to be taken. The DeviceLynk and Libelium SMART Water Monitoring application is a simple, cost effective Industrial IoT solution to monitor water quality!

More information:

Devicelynk offers 14 days free trial

Rates after free trial: https://devicelynk.com/contact/

Application examples

Smart Water

Case Studies

Hardware Components

ItemQty
Meshlium 4G 868/900 AP 1
Plug & Sense! SW 868/900 2
Conductivity Sensor Probe2
pH sensor2
Oxidation Reduction Potential sensor2
Dissolved Oxygen sensor2
Soil/Water temperature (Pt-1000) sensor probe 2m2
Conductivity Calibration Kit, K=0,11
ItemQty
Conductivity Calibration Kit, K=11
Conductivity Calibration Kit, K=101
ORP Calibration Solution1
pH Calibration Kit1
DO Calibration Solution1
outdoors USB cable2
International adapter3
External solar panel 7V - 500mA (power accessory for P&S!)2

Hardware Documentation

Info about tech

Read the Quick Start Guide to get information about kit components,
how to install and configure them and how to connect the
kit with the software services provider platform.

Plug & Sense! Documentation


  • 11 models and more than 150 sensor probes available (gases monitoring, water quality, Smart Cities, Smart Parking, etc)
  • Radio technologies: 802.15.4, 868, 900, WiFi, 4G, Sigfox and LoRaWAN
  • Industrial Protocols: RS-485, 4-20 mA, Modbus, CAN Bus
  • GPS receiver
  • Robust waterproof IP65 enclosure
  • Solar powered with external panel option
  • Open Source SDK and API
  • Over the air programming (OTAP)
  • Special holders and brackets ready for installation in street lights and building fronts
  • Graphical and intuitive programming interface: Programming Cloud Service
  • External SIM socket for 4G models
  • Minimum maintenance costs: Add or change a sensor probe in seconds
  • Fully certified for the main markets: CE (Europe) / FCC (US) / IC (Canada) / ANATEL (Brazil) / RCM (Australia) / PTCRB (US) / AT&T (US)

Check all the Documentation

Meshlium Documentation


  • Multiprotocol IoT gateway. Use up to 4 radios at the same time
  • Connectivity: Ethernet, WiFi, 4G, 802.15.4, RF 868/900
  • 8GB of internal storage
  • MySQL database up and running off-the-shelf
  • Web manager interface
  • Secure protocols (WPA-PSK / HTTPS)
  • Robust aluminium case (IP65)
  • Special holders and brackets ready for installation in street lights and building fronts
  • External SIM socket
  • GPS receiver
  • 4 versions: Europe (EU), USA & Canada (US), Australia (AU), Brazil (BR)
  • Fully certified for the main markets: CE (Europe) / FCC (US) / IC (Canada) / ANATEL (Brazil) / RCM (Australia) / PTCRB (US) / AT&T (US)

Check all the Documentation

Hardware Support

Technical Service (2 hours included)

  • Arranged in 1 hour time-slot.
  • Online: text, screen share, mic and webcam. Interactive.
  • Useful for:
    • Solve urgent questions that cannot wait forum timelines debug your code.
    • Guide you step by step.
    • Help you to design a system architecture.
    • Improve your program to reduce power consumption, make it more efficient, etc

Know More

Programming Service

The Plug & Sense! nodes come ready to be used. Our engineers create complete codes for that specific devices. Codes are uploaded and tested one by one, so the user just needs to switch the nodes on.

Access to and navigation on our website
means express acceptance of our Privacy Policy
and the use of cookies by Libelium.